The 4N1 Faucet and 4N1 Instant Hot Water Tank must be sold together

The 4N1 Faucet and 4N1 Instant Hot Water Tank must be sold together

4N1 Aqua-System is a 2-piece configuration. Includes Faucet, Tank and customer uses their choice of Filtration System.

4N1 Aqua-System Plus is a 3-piece configuration. Includes Faucet, Tank and AquaNuTech’s Filtration System.

The handle on the right side of the faucet operates the standard cold/hot water like any other full-flow kitchen faucet.

Touch-Sensor on the left side of the faucet operates both filtered water and filtered instant hot water.

Touch-Sensor dispenses Filtered Water with a single touch on/off. If left on it with automatically shut off after dispensing 2-liters.

Touch-Sensor dispenses Filtered Instant Water by maintaining touch on the sensor throughout dispensing process. Filtered Instant Hot Water will begin dispensing after a 3-second activation safety-delay. Dispensing will automatically shut off after dispensing 2-liters or instantaneously when touch ceases.

Occasional dripping/spitting is common when any brand of instant hot water dispenser is initially installed or is in the 'heating' mode. Certain altitude and water pressure conditions can affect this issue. Once the water level in the dispenser is filled and heated, the dripping/spitting should cease.

1.8 Gallons Per Minute (GPM)

The 4N1 Aqua-System is compatible with all other brands of filtration systems including Reverse Osmosis Systems (ROS).

Standard Full-Flow Cold/Hot Water with a Pulldown & Spray Head. Dispenses Filtered Water & Filtered Instant Hot Water on-demand.mosis Systems (ROS).

Ranges from 167°-208°F or 75°-98°C

Touch the universal power button located in the center of the display for 3-seconds

Dispenser is empty or water is at an insufficient level

Maintain touch on the touch sensor on the faucet. Red light will illuminate and this will begin to fill the dispenser. Maintain touch on sensor until water flows from the faucet spout. E3 Error Code will disappear. Power on dispenser. Set to desired temperature and enjoy.

Contemporary Style = Stainless Steel Spout, Solid Brass Body/Handle/Head with a Magnetic Docking-Mechanism.

Classic/Transitional Style = Stainless Spout, Solid Brass Body/Handle, ABS Head

ASME A112.18.1, CSA B125.1, NSF 61, 372, CAL Green, CEC Certified, ADA Compliant

13 amps

Every 8-12 months used with a standard filtration faucet

Every 6-8 months used with a 4N1 Aqua-System

1-3/8”

17.5”

Ceramic Disk Cartridges

: It is compatible with all brands of filtration faucets other than the Insinkerator, Dornbracht and a couple of the Brizo skus. A Compatibility Adapter-Kit is included in the HT4105 for the most popular brands of filtration faucets.

Our Filtration Faucets are compatible with all other brands of instant hot water tanks other than the Insinkerator brand.

UL, USA/Canada Electrical, CEC Appliance Cert.

3-years

7.5” x 7.5” x 10.75”H

½ Gallon Tank

60-cups per hour

1500-watt heating element

1-watt of energy used in Eco-Mode

11 amps

Dispenser is empty or water is at an insufficient level

Unplug the dispenser. Hold open the hot handle on your filtration faucet. You will hear the dispenser filling. Continue to hold open the hot handle until the water flows smoothly from the spout. Power on the unit. Set to desired temperature and enjoy.

Thermostat is unable to read an accurate water temperature

Thermostat is unable to read an accurate water temperature, so the tank is venting through the faucet spout. All brands of instant hot water tanks are designed this way.

Faucet hoses/tubes are connected backwards to the inlet/outlet on top of the Instant Hot Water Dispenser.

Occasional dripping/spitting is common when any brand of instant hot water dispenser is initially installed or is in the 'heating' mode. Certain altitude and water pressure conditions can affect this issue. Once the water level in the dispenser is filled and heated, the dripping/spitting should cease.

Lead-Free Solid Brass with a silicone lined spout for protection from heat and corrosion.

ASME A112.18.1, CSA B125.1, NSF 61, 372, CAL Green, CEC Certified, ADA Compliant

Our Filtration Faucets are compatible with all other brands of instant hot water tanks other than the Insinkerator brand.

Our Filtration Faucets are compatible with all other brands of under sink filtration systems including Reverse Osmosis Systems (ROS).

1-3/8”

9.75”

Ceramic Disk Cartridge

1500 Gallons

Yes.

Reduction of Chlorine, Odor, Scale, Asbestos, Cyst, Lead, Silt Reduction Wrap, Certified at .5 Microns Carbon Block

NSF/ANSI Standard 42 - NSF/ANSI Standard 53

At least .55 Us Gallons/5.678 Liters per minute

Every 8-12 months used with a standard filtration faucet

Every 6-8 months used with a 4N1 Aqua-System

Replacement Cartridge-FLC1000

Lead-Free Solid Brass with a silicone lined spout

3-1/2” tall with a 4” spout reach

1-3/8”

Top-Fill 16 oz. Clear Bottle

If sensors on the bottom of the control box senses water, alarm will sound and unit will shut-off cold water supply.

9-vote battery

No.

Replaces a disposal toggle-switch located on a wall or under the cabinet with a streamlined elegant, finished button. Simply operate disposal by pushing button on/off.

Returns/Refunds can be reviewed if notified within 30-days of delivery, if approved, all products must not have ever been installed and returned in original packaging. Shipping charges will be the responsibility of the customer.

Varies by product, functionality, and finish. Please refer to specification sheets per product @ aquanutech.com.